Renesas Starter Kit Quick Start for H8/38099 LCD module E8a header Application Board Interface Reset switch LCD module connector E8a emulator Analog adjust Application Board Interface User LEDs User switches D007574_11_S01_V01
1. Installation Do not connect the E8a emulator hardware until the software support has been installed. 1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to the CD root folder and double click on “setup.exe”. 2. The installer will ask you which language is to be used, please choose the appropriate one. 3. On the first screen of the installer proper, click . 4.
26. Select the Debug build configuration in the left hand drop down list on the toolbar. 27. Click on the “Build” icon to compile, assemble and link the project. 4. Programming and Debug 28. Ensure the “SessionH8_Tiny_SLP_E8a_SYSTEM_300H” session in the right hand drop down list on the toolbar is selected. 29. Click the button on the debug toolbar. 30. The “Emulator Setting” dialog will be shown. Select the correct device type (e.g. H8/38099F for RSKH838099). 31. Select “Erase Flash and Connect”.
39. Enter the clock speed (“10.00MHz” for the RSKH838099) then click . 40. Enter the ID Code (“0E8A” for the RSKH838099) then click . The connection to the Renesas Starter Kit will be completed and will activate the debugger buttons on the High-performance Embedded Workshop toolbar. 41. Right click on the download module listed in the left hand pane and select “Download”. The code will be downloaded to the microcontroller. This may take several seconds. 42. Click the button.
6. Renesas H8 Compiler The version of the compiler provided with this Renesas Starter Kit is fully functional but time limited. You have 60 days to evaluate the full product before the compiler will limit the code linker to 64k bytes. Full licensed H8 compiler versions are available from your Renesas supplier. 7. Support Online technical support and information is available at: www.renesas.com/renesas_starter_kits Technical Contact Details America: techsupport.rta@renesas.com Europe: tools.support.
