Specifications

43
Tools*
• evaluation board in a metal case (CE
marked), containing H8/H8S
microcontroller, external SRAM, 2
serial ports, LED’s, RESET and NMI
push buttons and headers to access all
microcontroller signals
• serial cable
• HDI-M monitor software
• GNU and in most cases IAR C-
Compiler software (IAR Compiler in
evaluation version)
• Tutorials, installation manual incl.
Circuit diagrams, device manuals and
all the software manuals in electronic
format
• For evaluation boards using Flash
microcontrollers,also Hitachi’s Flash
programming software is included.
These Evaluation boards are available for
the following microcontrollers
*For a detailed description of our tools order
literature number 17-001
Device family Evaluation
Board
H8/3048F (also H8/304x) EVB3048F
H8/3067F (also H8/3062F) EVB3067F
H8S/2144F (also H8S/2134F) EVB2144F
H8S/2655 EVB2655
H8S/2357F (also other 23xx) EVB2357F
H8S/2633F EVB2633F
H8S/2623F EVB2623F
Good tools are paramount to the
successful development of a
microcontroller based application. The
trend to greater system integration and
the increased complexity of new designs
has demanded that high quality,
professional support tools are available for
all stages of the design process. Hitachi
has chosen not only to follow the market
trend,but to develop support tools which
are powerful,highly integrated,
innovative and simple to use,and thus to
provide it’s customers with market
leading development tools.
Evaluation boards
Hitachi provides a full set of quality, low
cost Evaluation boards for its 16-bit
microcontrollers. These can be used to:
• evaluate suitability of the device for
an application,e.g. to run
benchmarks
• develop software, while the hardware
engineers use emulators
• build prototypes of a system quickly.
Each kit contains everything an engineer
needs to get started (only a power supply
is needed in addition):
Emulators
Hitachi provides fully-featured in-
circuit,real-time emulators for all of its
devices,at a very competitive
price/performance ratio.
The first-generation H8/300H devices
are supported by PCE’s (PC based
emulators). These feature:
• zero-wait,real-time,in-circuit
emulation up to 16MHz
• soft- and hardware breakpoints
• trace buffer for address, data, transfer
type, interrupt mask and user probes
• 3V and 5V support (were appropriate)
• emulator control via HDI software,
featuring the same GUI like HDI-M
on the Evaluation boards
• ....and much more
H8S as well as the second-generation
H8/300H devices are supported by
Hitachi’s new highly sophisticated E6000
emulator. While remaining low cost,
E6000 provides a wealth of state-of-the-
art features that allow design engineers to
quickly get their system up and running:
• zero-wait,real-time,in-circuit
emulation up to 40MHz
• soft- and hardware breakpoints based
on a ‘Complex event system’(CES)
that allows event sequencing
• trace buffer for address, data, transfer
type, interrupt mask and user probes,
featuring acquisition filtering
• timing/performance analysis with a
resolution as low as 20ns
• 3V and 5V support (were appropriate)
• emulator control via HDI software,
featuring the same GUI like HDI-M
on the Evaluation boards