Datasheet

Section 3 Exception Handling
Rev.5.00 Nov. 02, 2005 Page 56 of 500
REJ09B0027-0500
Bit Bit Name
Initial
Value R/W Description
3 IWPF3 0 R/W WKP3 Interrupt Request Flag
[Setting condition]
When WKP3 pin is designated for interrupt input and the
designated signal edge is detected.
[Clearing condition]
When IWPF3 is cleared by writing 0.
2 IWPF2 0 R/W WKP2 Interrupt Request Flag
[Setting condition]
When WKP2 pin is designated for interrupt input and the
designated signal edge is detected.
[Clearing condition]
When IWPF2 is cleared by writing 0.
1 IWPF1 0 R/W WKP1 Interrupt Request Flag
[Setting condition]
When WKP1 pin is designated for interrupt input and the
designated signal edge is detected.
[Clearing condition]
When IWPF1 is cleared by writing 0.
0 IWPF0 0 R/W WKP0 Interrupt Request Flag
[Setting condition]
When WKP0 pin is designated for interrupt input and the
designated signal edge is detected.
[Clearing condition]
When IWPF0 is cleared by writing 0.