Datasheet

Section 7 ROM
Rev.5.00 Nov. 02, 2005 Page 90 of 418
REJ09B0028-0500
Bit Bit Name
Initial
Value R/W Description
0 P 0 R/W Program
When this bit is set to 1, and while the SWE=1 and
PSU=1 bits are 1, the flash memory changes to program
mode. When it is cleared to 0, program mode is
cancelled.
7.2.2 Flash Memory Control Register 2 (FLMCR2)
FLMCR2 is a register that displays the state of flash memory programming/erasing. FLMCR2 is a
read-only register, and should not be written to.
Bit Bit Name
Initial
Value R/W Description
7 FLER 0 R Flash Memory Error
Indicates that an error has occurred during an operation
on flash memory (programming or erasing). When FLER
is set to 1, flash memory goes to the error-protection
state.
See 7.5.3, Error Protection, for details.
6 to 0 — All 0 — Reserved
These bits are always read as 0.