Datasheet

Section 2 CPU
Rev.5.00 Nov. 02, 2005 Page 46 of 418
REJ09B0028-0500
• Prior to executing BSET instruction
MOV.B #80, R0L
MOV.B R0L, @RAM0
MOV.B R0L, @PDR5
The PDR5 value (H'80) is written to a work area in
memory (RAM0) as well as to PDR5.
P57 P56 P55 P54 P53 P52 P51 P50
Input/output Input Input Output Output Output Output Output Output
Pin state Low
level
High
level
Low
level
Low
level
Low
level
Low
level
Low
level
Low
level
PCR5 0 0 1 1 1 1 1 1
PDR5 1 0 0 0 0 0 0 0
RAM0 1 0 0 0 0 0 0 0
• BSET instruction executed
BSET #0, @RAM0
The BSET instruction is executed designating the PDR5
work area (RAM0).
• After executing BSET instruction
MOV.B @RAM0, R0L
MOV.B R0L, @PDR5
The work area (RAM0) value is written to PDR5.
P57 P56 P55 P54 P53 P52 P51 P50
Input/output Input Input Output Output Output Output Output Output
Pin state Low
level
High
level
Low
level
Low
level
Low
level
Low
level
Low
level
High
level
PCR5 0 0 1 1 1 1 1 1
PDR5 1 0 0 0 0 0 0 1
RAM0 1 0 0 0 0 0 0 1
Bit Manipulation in a Register Containing a Write-Only Bit
Example 3: BCLR instruction executed designating port 5 control register PCR5
P57 and P56 are input pins, with a low-level signal input at P57 and a high-level signal input at
P56. P55 to P50 are output pins that output low-level signals. An example of setting the P50 pin as