Datasheet

Section 9 Timers
Rev. 8.00 Mar. 09, 2010 Page 272 of 658
REJ09B0042-0800
Bit 2—Compare Match Flag L (CMFL)
Bit 2 is a status flag indicating that TCFL has matched OCRFL. This flag is set by hardware and
cleared by software. It cannot be set by software.
Bit 2
CMFL Description
0 Clearing condition: (initial value)
After reading CMFL = 1, cleared by writing 0 to CMFL
1 Setting condition:
Set when the TCFL value matches the OCRFL value
Bit 1—Timer Overflow Interrupt Enable L (OVIEL)
Bit 1 selects enabling or disabling of interrupt generation when TCFL overflows.
Bit 1
OVIEL Description
0 TCFL overflow interrupt request is disabled (initial value)
1 TCFL overflow interrupt request is enabled
Bit 0—Counter Clear L (CCLRL)
Bit 0 selects whether TCFL is cleared when TCFL and OCRFL match.
Bit 0
CCLRL Description
0 TCFL clearing by compare match is disabled (initial value)
1 TCFL clearing by compare match is enabled