Datasheet

REVISION HISTORY
Rev. Date Description
Page Summary
M32C/80 Group Datasheet
A-1
0.10 Sep., 02
New Document –
0.11 Sep., 02
Table 1.1.1 “CAN” deleted 3
0.12 Nov., 02
Table 1.1.1
“4.2 to 5.5V” --> “3.0 to 5.5V”
"3.0 to 3.6V (f(XIN)=20MHz without software wait)" deleted
"26mA (f(XIN)=20MHz without software wait,Vcc=3.3V)" deleted
3
1. Overview changed
1.2 Performance Outline changed
1.3 Block Diagram added
1.5 Pin Assignments changed
Table 1.3 Pin Characteristics for 100-Pin Package changed
1.6 Pin Description added
2. Central Processing Unit (CPU) added
3. Memory added
4. Special Function Registers (SFR) added
0.30 Aug., 02
–
All pages Words standardized: On-chip oscillator, A/D converter and D/A converter
Overview
2, 3 • Table 1.1 and 1.2 M32C/80 Group Performance
"When using 16-bit bus" added to I/O ports
"Option" deleted from Serial I/O, I
2
C bus, and IEBus
"Voltage Detection Circuit" added
Value added to "Power Consumption"
"Flash Memory" added
4 • 1.3 Block Diagram Description deleted
5 • Figure 1.2 ROM/RAM Capacity deleted
• Table 1.3 M32C/85 Group Note1 deleted
11 • Table 1.5 Pin Description Note 1 added to I/O ports
Memory
23 • Chapter Description modified
• Figure 3.1 Memory Map modified
SFR
16- • "X: Nothing is assigned" modified to "X: Indeterminate"
• "?: Indeterminate” modified to "X: Indeterminate"
• "Users cannot use any symbols with *" deleted
• Register names, symbols, value after RESET of addresses 001716, 001B16,
001F16, 002B16, 002F16, 004C16, and 004D16 deleted
• Value after RESET in the PM0 register revised
16 • Note 3 deleted
29 • Note 1 added to addresses 03E016 to 03EB16
0.40 Jun., 04
1.00 Nov., 04