Datasheet

Page 33
58fo5002,80.luJ12.1.veR
4. Special Function Registers (SFR)
)T48/C23M,48/C23M(puorG48/C23M
Address Register Symbol Value after RESET
CAN0 Message Slot 9 Control Register / C0MCTL9/ 0000 00002
(2)
023916
CAN0 Local Mask Register B Standard ID1 C0LMBR1 XX00 00002
(2)
CAN0 Message Slot 10 Control Register / C0MCTL10/ 0000 00002
(2)
023A16
CAN0 Local Mask Register B Extended ID0 C0LMBR2 XXXX 00002
(2)
CAN0 Message Slot 11 Control Register / C0MCTL11/ 0016
(2)
023B16
CAN0 Local Mask Register B Extended ID1 C0LMBR3 0016
(2)
CAN0 Message Slot 12 Control Register / C0MCTL12/ 0000 00002
(2)
023C16
CAN0 Local Mask Register B Extended ID2 C0LMBR4 XX00 00002
(2)
023D16 CAN0 Message Slot 13 Control Register C0MCTL13 0016
(2)
023E16 CAN0 Message Slot 14 Control Register C0MCTL14 0016
(2)
023F16 CAN0 Message Slot 15 Control Register C0MCTL15 0016
(2)
024016 CAN0 Slot Buffer Select Register C0SBS 0016
(2)
024116 CAN0 Control Register 1 C0CTLR1 X000 00XX2
(2)
024216 CAN0 Sleep Control Register C0SLPR XXXX XXX02
024316
024416 0016
(2)
CAN0 Acceptance Filter Support Register C0AFS
024516 0116
(2)
024616
024716
024816
024916
024A16
024B16
024C16
024D16
024E16
024F16
025016
025116
025216
025316
025416
025516
025616
025716
025816
025916
025A16
025B16
025C16
025D16
to
02BF16
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTES:
1. The BANKSEL bit in the C0CTLR1 register switches functions for addresses 0220
16 to 023F16.
2. Values are obtained by setting the SLEEP bit in the C0SLPR register to "1" (sleep mode exited) after reset and
supplying the clock to the CAN module.
(Note 1)