User's Manual

( 12 / 36 )
3.2 Specifications
Table 3.1 lists specifications of the M34519T-MCU.
Table 3.1 M34519T-MCU specifications
*1. Available by changing MCUs
*2. N-ch open drain output and CMOS output are selectable by a control register.
233.35 x 135.00 x 1.60 mm
5 to 35°C (non-condensing)
• M34519T-MCU
• 100-wire half-pitch cable
• PCA4029
• 50-wire normal-pitch cable
• 2-wire external trigger cable
• M34513T-PTCA
• M34513T-PTCB
• M34513T-PTCC
• OSC-2 (not mounted)
• M34584MD-001FP (MCU for replacement)
• M4584 (ROM for replacement)
Board dimensions
Operating temperature
Product configuration
Divide-by-8 mode (f(XIN)/8)
Divide-by-4 mode (f(XIN)/4)
Divide-by-2 mode (f(XIN)/2)
Through mode (f(XIN))
Divide-by-8 mode (f(XIN)/8)
Divide-by-4 mode (f(XIN)/4)
Divide-by-2 mode (f(XIN)/2)
Through mode (f(XIN))
Emulator PC4504
4518 Group, 4519 Group, 4583 Group*
1
, 4584 Group*
1
4518, 4519 Groups M34519M8-001FP (preinstalled)
4583, 4584 Groups M34584MD-001FP (included)
4518, 4519 Groups M4519 (preinstalled)
4583, 4584 Groups M4584 (included)
Main clock: 6.0 MHz (OSC-2 [6.0 MHz mounted])
Emulator
Applicable MCUs
Evaluation MCU
Monitor program
Clock
Target system voltage
Power supply to MCU
board
Port emulation
Emulated functions
5 V
3 V
Port
Direction
Input/output *
2
Device used
Input 74HC245
74ALS641 (N-ch)
74VHC125 (CMOS)
Input/Output: 74HC4066
6.0 MHz
4.4 MHz
3 V ±10% or 5 V ±10%
Supplied by the PC4504's internal power supply (+5 V, +12 V).
3 V is generated from +12 V.
Output
Input/output
P21, P22
P00--P03,
P10--P13,
D0--D5
Pin
P00--P03,
INT0, INT1
P10--P13
Pin
P00--P03
P10--P13
Pin
P00--P03,
P10--P13
D0--D5
Factor of return
Edge detection
or level detection
L-level detection
Control register
PU0
PU1
Control register
Key-on wakeup input
in RAM backup mode
Pullup resistor control
Port output type control
FR1, FR2
FR0