To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.
Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office.
User’s Manual M3A-2114 User’s Manual 32170/32171/32172/32173/32174 Group Starter Kit All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Electronics Corp. without notice. Please review the latest information published by Renesas Electronics Corp. through various means, including the Renesas Electronics Corp. website (http://www.renesas.com). Rev.2.0 2004.
* Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. * Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated. * All other brand names and product names are trademarks or registered trademarks of each proprietary company. Keep safety first in your circuit designs! 1.
Precautions on Using The Product Described Herein 1.The product described herein should be used in combination with the parts included with the starter kit. If the product is operated in combination with any other item, its operation cannot be guaranteed. Nor will requests for help or suggestion be answered. 2.The product described herein was prepared for program development or evaluation purposes. The product cannot be used for the mass production. 3.
Preface Thank you very much for purchasing the 32170/ 32171/32172/32173/32174 Group Starter Kit, the M3A-2114G52A/M3A-2114G62A/M3A-2114G72A and M3A-2114G52/M3A-2114G62/M3A-2114G72. This manual describes how to set up the hardware and software products included with the 32170/ 32171/32172/32173/32174 Group Starter Kit and the precautions to be observed when using those products.
Contents 1. OVERVIEW .................................................................................................................................................... 8 1.1 OUTLINE OF THE STARTER KIT ........................................................................................................................8 1.2 SYSTEM CONFIGURATION ..............................................................................................................................11 2.
5.3 HARDWARE SETUP WHEN THE EVALUATION BOARD BY ITSELF IN USE ........................................................30 5.3.1 M3A-2114 Evaluation Board Power Supply and Settings ..................................................................30 5.3.2 M3A-2114 Power Supply .......................................................................................................................30 6. SOFTWARE SETUP ...............................................................................................
Chapter 1 Overview M3A-2114 User’s Manual (7/68)
Overview 1 1. Overview 1.1 Outline of the Starter Kit The Starter Kit M3A-2114G52A and M3A-2114G52 are provided for the evaluation of the 32170/32174 Group microcomputers. The Starter Kit M3A-2114G62A and M3A-2114G62 are provided for the evaluation of the 32171 Group microcomputers. The Starter Kit M3A-2114G72A and M3A-2114G72 are provided for the evaluation of the 32172/32173 Group microcomputers.
Overview 1 The following explains each item that constitutes the kits. (1) M3A-2114G02, M3A-2114G12, M3A-2114G22 (M3A-2114 Evaluation Board) The M3A-2114G02 Evaluation Board contains one of the 32170/32174 group microcomputer of 32-bit and single-chip RISC with a socket. The M3A-2114G12 Evaluation Board contains one of the 32171 group microcomputer with a socket. The M3A-2114G22 Evaluation Board contains one of the 32172/32173 group microcomputer with a socket.
Overview 1 (5) M3A-2195 (SDI Interface Board with Housing) The M3A-2195 connects the host PC’s LPT parallel port and the M3A-2114 Evaluation Board’s JTAG pin together, for controlling input/output between M3S-KD32R and the M3A-2114 Evaluation Board. (6) M3A-2191 (Connector Pitch Converter) The M3A-2191 board converts the 10-pin flat cable connector pitch between the M32100T-EZ-E (or M3A-2195) and the M3A-2114 Evaluation Board.
Overview 1 1.2 System Configuration Figure 1.2-1 1.2-2 and 1.2-3 below show system configurations of M3A-2114G72A connected to an included emulator, system configurations of M3A-2114G72 connected to an included emulator, and M3A-2114G22 by itself, respectively.
Overview 1 * This is a blank page * M3A-2114 User’s Manual (12/68)
Chapter 2 Contents of the Product Package M3A-2114 User’s Manual (13/68)
2 Contents of the Product Package 2. Contents of the Product Package This chapter shows the contents of the Starter Kit product package. When unpacking, check to see that all items are included with your package. 2.1 Packaged Product Items Table 2.1-1 shows the contents of the Starter Kit product package. Table 2.1-1 Packaged Contents of 32170/32171/32172/32173/32174 Group Starter Kit Quantity Packaged product name Outline of product M3A-2114 G52A G62A G72A G52 G62 G72 1 pc. - - 1 pc.
Contents of the Product Package 2 2.2 Contents of CD-ROM The CD-ROM contains the software, manuals, various data sheets, and sample programs which are needed for you to use the Starter Kit.
Contents of the Product Package 2 * This is a blank page * M3A-2114 User’s Manual (16/68)
Chapter 3 Usage Precautions M3A-2114 User’s Manual (17/68)
Usage Precautions 3 3. Usage Precautions 3.1 Guaranteed Scope of the Starter Kit The Starter Kit was developed for users to trial the 32170/32171/32172/32173/32174 group microcomputer specifications and development environment. Therefore, the results arising from the use of the Starter Kit are not guaranteed. The M3A-2195 (SDI Interface Board with Housing) was developed for use with only the Starter Kit. If the M3A-2195 is used with any other system, its operation cannot be guaranteed.
Usage Precautions 3 3.3 About M32100T-EZ-E for M3A-2114G52A/ G62A/ G72A M32100T-EZ-E in M3A-2114G52A is an emulator designed exclusively for 32170/32174 group microcomputer, and cannot be used for M32R microcomputers except for 32170/32174 group. M32100T-EZ-E in M3A-2114G62A is an emulator designed exclusively for 32171 group microcomputer, and cannot be used for M32R microcomputers except for 32171 group.
Usage Precautions 3 3.5 About M3T-PD32RM The following describes precautions to be observed when using M3T-PD32RM. 3.5.1 Operating Manuals To use M3T-PD32RM of M3A-2114G52A/ G62A/ G72A, see the manuals shown below. - M3T-PD32RM release notes - PD32RM Help To use M3S-KD32R of M3A-2114G52/ G62/ G72, see the manuals shown below. - M3S-KD32R release notes - PD32R Help 3.5.2 About Break Operation M3T-PD32RM (or M3S-KD32R) uses the M32R core’s internal debug circuit (SDI) to realize break functions.
Usage Precautions 3 (5) About hardware break Debug functions of M3T-PD32RM (or M3S-KD32R) are realized by using the M32R core’s internal debug circuit (SDI), and not by using the emulator’s hardware resources based on bus signals and debug information from the MCU as in conventional emulators. The pre-execution PC break, post-execution PC break, and chip break all uses this internal debug circuit (SDI).
Usage Precautions 3 3.6 About Evaluation Board When the evaluation board does not start operation after supplied power, check the following points. 3.6.1 Contact failure of IC Socket Oscillation or thermal expansion may cause a poor connection between microcomputers and IC socket on the Evaluation Board. Follow the steps below. - Screw down the top cover of IC socket with setscrews at four corners. The tightening torque shall be 0.55Kg·cm·maximum.
Chapter 4 Starter Kit Usage Condition M3A-2114 User’s Manual (23/68)
Starter Kit Usage Condition 4 4. Starter Kit Usage Conditions The following shows the conditions under which the Starter Kit can be used. 4.1 Ambient Conditions Table 4.1-1 shows the ambient conditions under which the Starter Kit can be used. Table 4.1-1 Operating Environment Symbol Topr Parameter Rated value Operating ambient temperature 5 to 35 Unit Remarks o C when connecting to emulator Operating ambient temperature 0 to 70 o C No dewdrops allowed. Corrosive gas environment not allowed.
Chapter 5 Hardware Setup M3A-2114 User’s Manual (25/68)
Hardware Setup 5 5. Hardware Setup This chapter describes how to set up the hardware components necessary to use the Starter Kit. Table 5.0-1 and Table 5.0-2 show how to set up the hardware components. Table 5.0-1 Hardware Setup Procedure Setup Procedure When connected to the emulator When using the evaluation board by itself M3A-2114G52A/ M3A-2114G52/ M3A-2114G52A/ G62A/G72A, G62A/ G72A G62/ G72 M3A-2114G52/ G62/ G72 Set the emulator. 1st (Refer to 5.1.1) 1st (Refer to 5.2.
Hardware Setup 5 5.1.2 M3A-2114 Evaluation Board Power Supply and Settings The following shows how to set the M3A-2114 Evaluation Board. Use a 5V DC power supply to feed power to the M3A-2114 Evaluation Board. Use included 5V power supply cable to connect the 5V DC power supply and CN2 connector included with the M3A-2114 Evaluation Board. The method for connecting them is shown in Figure 5.1-2. M3A-2114 evaluation board JP1 JP2 CN2 4.75 - 5.25V DC power supply JP3 LED1 Figure 5.
Hardware Setup 5 5.2 Hardware Setup when M3A-2114G52/ G62/ G72 in use 5.2.1 M3A-2195 Power Supply Connection and Settings The following shows how to set M3A-2195. For more details, refer to M3A-2195 User’s Manual. Power to the M3A-2195 SDI Interface Board can be fed from either a 5V DC power supply (5 V) or a 12 DC power supply (6-12 V). Use the included 5V or 12V power supply cables to connect M3A-2195 and a corresponding DC power supply. The method for connecting them is shown in Figure 5.
Hardware Setup 5 5.2.3 M3A-2114 Evaluation Board Power Supply and Settings The following shows how to set the M3A-2114 Evaluation Board. Use a 5V DC power supply to feed power to the M3A-2114 Evaluation Board. Use included 5V power supply cable to connect the 5V DC power supply and CN2 connector included with the M3A-2114 Evaluation Board. The method for connecting them is shown in Figure 5.1-3. M3A-2114 evaluation board JP1 JP2 CN2 4.75 - 5.25V DC power supply JP3 LED1 Figure 5.
Hardware Setup 5 5.3 Hardware Setup when the Evaluation Board by Itself in Use 5.3.1 M3A-2114 Evaluation Board Power Supply and Settings The following shows how to set the M3A-2114 Evaluation Board. Use a 5V DC power supply to feed power to the M3A-2114 Evaluation Board. Use an included 5V power supply cable to connect the 5V DC power supply and CN2 connector included with the M3A-2114 Evaluation Board. The method for connecting them is shown in Figure 5.3-1. M3A-2114 evaluation board JP1 JP2 CN2 4.
Chapter 6 Software Setup M3A-2114 User’s Manual (31/68)
Software Setup 6 6. Software Setup 6.1 M3T-PD32RM M3T-PD32RM is the debugger software that controls M32100T-EZ-E from the host PC. 6.1.1 Installing M3T-PD32RM [Notes] Make sure that the installer is executed by one who is authorized as an Administrator when Windows 2000/XP is used as an operating system of the host machine. No one but the user who has the authority of an Administrator can install M3T-PD32RM. (1) Run pd32rmv210r1_e.exe that is included in the Eng \ Tool \ Pd32rm directory of the CD-ROM.
Software Setup 6 6.1.2 Starting M3T-PD32RM Before starting M3T-PD32RM, make sure the hardware components have been set up in accordance with the instructions in 5.1 Hardware Setup when M3A-2114G52A/ G62A/ G72A in use, and that the Starter Kit hardware system (M3A-2114 Evaluation Board and M32100T-EZ-E) have been powered on. Note: M3T-PD32RM cannot be started unless the power to the hardware system is turned on. To start M3T-PD32RM, choose [Start] -> [Programs] -> [RENESAS-TOOL] -> [PD32RM V2.
Software Setup 6 (3) Setting Mode While the MCU tab is open, select the appropriate MCU operation mode from Mode selection. (4) Setting CPU clock While the MCU tab is open, select the “40“ for the appropriate CPU Clock. (5) Checking Serial No. While the MCU tab is open, make sure the Serial No. is in accordance with the following. When M3A-2114G52A in use, M3T-PD32RM can be started only with Serial No. as follows.
Software Setup 6 (6) Selecting a cross tool While the Debugging Information tab is open, select “CC32R(M32R) “ for Compiler. For the Starter Kit, M3T-CC32R is the only cross tool which has had its operation guaranteed. Cancel Cancel Help Help Figure 6.1-3 Selecting a Cross Tool When you have finished the above initialization, click the OK button to start M3T-PD32RM. If M3T-PD32RM communicates normally with the target system, it starts up and the M3T-PD32RM window shown in Figure 6.1-4 appears.
Software Setup 6 6.1.3 Error Messages during M3T-PD32RM Startup If M3T-PD32RM cannot communicate normally with the target system, it appears an error message in a pop-up box. (1) Causes of errors on the M3A-2114 Evaluation Board If the error pop-up box shown in Figure 6.1-5 appears when starting M3T-PD32RM, check whether power is supplied to the M3A-2114 Evaluation Board and whether it is firmly connected to M32100T-EZ-E. ERROR11473: Target MCU is not under control. Please reset target systems.
Software Setup 6 6.2 M3S-KD32R M3S-KD32R is the debugger software that controls the M3A-2195 SDI Interface Board from the host PC. 6.2.1 Installing M3S-KD32R [Notes for Windows 2000 / NT 4.0] Make sure that installer is executed by one who is authorized as an Administrator. No one but the user who has the authority of an Administrator can install the M3S-KD32R. (1) Run setup.exe that is included in the Eng\Tool\Kd32r\W95E directory of the CD-ROM.
Software Setup 6 6.2.2 Starting M3S-KD32R Before starting M3S-KD32R, make sure the hardware components have been set up in accordance with the instructions in 5.2 Hardware Setup when M3A-2114G52/ G62/ G72 in use, and that the Starter Kit hardware system (M3A-2114 Evaluation Board and M3A-2195 SDI Interface Board) have been powered on. Note: M3S-KD32R cannot be started unless the power to the hardware system is turned on. To start M3S-KD32R, choose [Start] -> [Programs] -> [RENESAS-TOOL] -> [KD32R V4.
Software Setup 6 (4) Setting CPU clock While the MCU tab is open, select the “40“ for the appropriate CPU Clock. (5) Setting PC communication mode While the MCU tab is open, select “AUTO“ for Type, and “378h“ or “278h“ for I/O Address. (6) Selecting a cross tool While the Debugging Information tab is open, select “CC32R(M32R) “ for Compiler. For the Starter Kit, M3T-CC32R is the only cross tool which has had its operation guaranteed. Cancel Cancel Help Help Figure 6.
Software Setup 6 6.2.3 Error Messages during M3S-KD32R Startup If M3S-KD32R cannot communicate normally with the target system, it appears an error message in a pop-up box. (1) Causes of errors on the SDI Interface Board side If the error pop-up box shown in Figure 6.2-5 appears when starting M3S-KD32R, check whether power is supplied to the M3A-2195 SDI Interface Board and whether it is firmly connected to the host PC with a cable (LPT parallel cable).
Software Setup 6 6.3 M3T-CC32R 6.3.1 Installing M3T-CC32R (1) Run cc32rv430r00_e.exe that is included in the Eng\Tool\Cc32r directory of the CD-ROM. (2) Proceed to install M3T-CC32R following messages on the installation screen. (3) When you are asked to select the license type of M3T-CC32R, select Trial License. (4) While installing M3T-CC32R, you will be asked to confirm whether to change AUTOEXEC.BAT variables. If you chose not to change, add the following contents to AUTOEXEC.BAT.
Software Setup 6 * This is a blank page * M3A-2114 User’s Manual (42/68)
Appendix A Contents of CD-ROM M3A-2114 User’s Manual (43/68)
Contents of CD-ROM Appendix A Appendix A Contents of CD-ROM The CD-ROM contains the software, manuals, various data sheets, and sample programs which are needed for you to use the Starter Kit.
Contents of CD-ROM Appendix A 1.2 Tool (1) M3T-CC32R M3T-CC32R (Cross Tool Kit for the M32R Family, trial version whose useful period is limited) is included. Its directory structure is shown below. (English version) Eng + Tool + Cc32r + + cc32rv430r00_e.exe : Setup programs for M3T-CC32R + as32rue.pdf : M3T-CC32R user’s manual (Assembler) + cc32rue.pdf : M3T-CC32R user’s manual (C Compiler) + mapue.pdf : MAP Viewer user’s manual (Japanese version) Jpn + Tool + Cc32r + + cc32rv430r00_j.
Contents of CD-ROM Appendix A (3) M3S-KD32R (Discontinued) M3S-KD32R (Debugger for the Starter Kit) is included. This debugger software (Windows -compliant version) is used to control the microcomputer on the evaluation board from the host PC by connecting it and the host PC with LPT parallel cable through the M3A-2195 (SDI Interface Board). Its directory structure is shown below. (English version) Eng + Tool + Kd32r + + KD32RNE.
Contents of CD-ROM Appendix A (5) Oldversion Old versions of tools are included. Its directory structure is shown below. (English version) Eng + Tool + Oldversion + + Cc32rv3 : Objects for M3T-CC32R Version 3 + Cc32rv41 : Objects for M3T-CC32R Version 4.1 + Cc32rv42 : Objects for M3T-CC32R Version 4.
Contents of CD-ROM Appendix A 1.3 Manual The M32R Family related manuals and data sheets are included in PDF file format. (English version) Eng + Manual + + Readme_e.txt : README file + M32rsm_e.pdf : M32R Family software manual + 32fpusm_e.pdf : M32R-FPU software manual + 32170ds_e.pdf : 32170/32174 Group microcomputer data sheet + 32171ds_e.pdf : 32171 Group microcomputer data sheet + 32172ds_e.pdf : 32172/32173 Group microcomputer data sheet + 32176ds_e.
Contents of CD-ROM Appendix A (Japanese version) Jpn + Manual + + Readme_j.txt: README file + M32rsm_j.pdf : M32R Family software manual + 32fpusm_j.pdf : M32R-FPU software manual + 32171ty_j.pdf : 32171 Group precautions + rjj09b0123_32176no.pdf : 32176 Group precautions + 32170ds_j.pdf : 32170/32174 Group microcomputer data sheet + 32171ds_j.pdf : 32171 Group microcomputer data sheet + 32172ds_j.pdf : 32172/32173 Group microcomputer data sheet + 32176ds_j.
Contents of CD-ROM Appendix A 1.4 Board Related Manual (Document) The product standards, part list, connection diagrams and user’s manuals for the evaluation board in Starter Kit are included in PDF file format. (1) M3A-2114 Evaluation Board related documents The related documents for the 32170/32171/32172/32173/32174 Group Evaluation Board are included in PDF file format. (English version) Eng + Document + M3A-2114 + + Readme_e.txt : README file + 2114um_e.
Contents of CD-ROM Appendix A (3) M3A-2152 Evaluation Board related documents The related documents for the 32176 Group Evaluation Board are included in PDF file format. (English version) Eng + Document + M3A-2152 + + Readme_e.txt : README file + 2152um_e.pdf : M3A-2152 Starter Kit user’s manual + 2152g02sk_e.pdf : M3A-2152G02 product standards (Japanese version) Jpn + Document + M3A-2152 + + Readme_j.txt : README file + 2152um_j.pdf : M3A-2152 Starter Kit user’s manual + 2152g02sk_j.
Contents of CD-ROM Appendix A (5) M32100T-EZ-E related documents M32100T-EZ-E documents are included in PDF file format. (English version) Eng + Document + M32100T-EZ-E + + Readme_e.txt : README file + rej10j0002_m32100teze_u.pdf : M32100T-EZ-E user’s manual + rej10j0013_m32100teze_s.pdf: M32100T-EZ-E release note (Japanese version) Jpn + Document + M32100T-EZ-E + + Readme_e.txt : README file + rjj10j0002_m32100teze_u.pdf : M32100T-EZ-E user’s manual + rjj10j0014_m32100teze_s.
Contents of CD-ROM Appendix A (7) M3A-2145 Evaluation Board related documents The related documents for the M3S-UFLA32R are included in PDF file format. (English version) Eng + Document + M3A-2145 + + Readme_e.txt : README file + 2145g50sk_e.pdf : M3A-2145G50 product standards + 2145g02sk_e.pdf : M3A-2145G02 product standards + 2145g02p_e.pdf : M3A-2145G02 part list + 2145g50p_e.pdf : M3A-2145G50 part list + cdrom_e.
Contents of CD-ROM Appendix A (8) M3A-2195 SDI Interface Board related documents (Discontinued) The SDI Interface Board documents are included in PDF file format. (English version) Eng + Document + Discontinued_model + M3A-2195 + + Readme_e.txt : README file + 2195g50sk_e.pdf : M3A-2195G50 product standards + 2195c_e.pdf : M3A-2195 Evaluation Board connection diagram + 2195p_e.pdf : M3A-2195 part list + 2195g50p_e.pdf : M3A-2195G50 part list + 2195um_e.
Contents of CD-ROM Appendix A 1.
Contents of CD-ROM Appendix A * This is a blank page * M3A-2114 User’s Manual (56/68)
Appendix B Part List M3A-2114 User’s Manual (57/68)
Appendix B Component Table Appendix B Part List A part lists are provided in following pages for your reference.
Renesas Technology Corporation Handling Classification C No. Part List Title PPL-M3A-2114G52A Created Checked Power Train Group Revision Part Name Item No. Division in charge M3A-2114G52A Description Part Specification Part No. Part Type Name (Drawing No.
Renesas Technology Corporation Handling Classification C No. Part List Title PPL-M3A-2114G62A Created Checked Power Train Group Revision Part Name Item No. Division in charge M3A-2114G62A Description Part Specification Part No. Part Type Name (Drawing No.
Renesas Technology Corporation Handling Classification C No. Part List Title PPL-M3A-2114G72A Created Checked Power Train Group Revision Part Name Item No. Division in charge M3A-2114G72A Description Part Specification Part No. Part Type Name (Drawing No.
Renesas Technology Corporation Handling Classification C No. Part List Title PPL-M3A-2114G52-A Created Checked Power Train Group Revision Part Name Item No. Division in charge M3A-2114G52-A Description Part Specification Part No. Part Type Name (Drawing No.
Renesas Technology Corporation Handling Classification C No. Part List Title PPL-M3A-2114G62-A Created Checked Power Train Group Revision Part Name Item No. Division in charge M3A-2114G62-A Description Part Specification Part No. Part Type Name (Drawing No.
Renesas Technology Corporation Handling Classification C No. Part List Title PPL-M3A-2114G72-A Created Checked Power Train Group Revision Part Name Item No. Division in charge M3A-2114G72-A Description Part Specification Part No. Part Type Name (Drawing No.
Records of revision Date Version Revised points 02.01.30 Ver.1.00 First edition 04.10.21 Ver.2.00 -Incorporated Installation Manual -Added system configuration diagrams (1.2 System Configuration) -Added M3A-2114G52A/G62A/G72A (2.1 Packaged Product Items) -Added M3T-PD32RM and M32100T-EZ-E in CD-ROM (2.2 CD-ROM, Appendix A Contents of CD-ROM) -Added usage precautions (3.6 About Evaluation Board) -Added M3A-2114G52A/G62A/G72A (4.2 Host PC Condition) -Added M32100T-EZ-E settings (5.1.
* This is a blank page * M3A-2114 User’s Manual (66/68)
32170/32171/32172/32173/32174 Group Starter Kit M3A-2114 User’s Manual Ver. 2.0 Oct 21 2004 Copyright (c) 2004 RENESAS TECHNOLOGY CORPORATION All Rights Reserved No part of this manual may be reproduced or distributed in any form or by any means without the written permission of the publisher.
M3A-2114 User’s Manual 1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 Japan REJ10B0226-0200
