User Manual

1. Outline
The R0E5212DACFK00 is a converter board for connecting
the emulation probe R0E521000EPB00 and the compact
emulator R0E521000CPE00 for R8C/Tiny Series to a foot
pattern for 80-pin 0.5mm pitch LQFP (PLQP0080KB-A,
previous code: 80P6Q-A) of R8C/2C and 2D Groups.
2. Package Components (See Figure 1)
Table 1 Package Components
Item Quantity
R0E5212DACFK00
(Slave chip mounting board R0E521DAEPBS0
and 150mm FFC cable included)
1 pc.
YQPACK080SD
(made by Tokyo Eletech Corporation)
1 pc.
NQPACK080SD-ND
(made by Tokyo Eletech Corporation)
1 pc.
YQ-GUIDE
(made by Tokyo Eletech Corporation)
4 pcs.
R0E5212DACFK00 User's Manual (This manual) 1 pc.
3. Specifications
Table
2 Specifications
Applicable package
PLQP0080KB-A
(80-pin 0.5mm pitch LQFP)
Between R0E5212DACFK00 and
YQPACK080SD:
100 times guaranteedInsertion/removal
iterations of
connector
Between R0E521000EPB00 or
R0E521000CPE00 and
R0E5212DACFK00:
50 times
guaranteed
4. Usage (See Figure 2)
The R0E5212DACFK00 can be used for debugging and
on-board evaluation in common by mounting the
NQPACK080SD-ND on the user system.
(1) For debugging
Mount the NQPACK080SD-ND on the foot pattern of the
user system. Mount the YQPACK080SD on the
NQPACK080SD-ND, and fix them with the YQ-GUIDE’s
(do not use the screws included with the YQPACK080SD).
After connecting the R0E521000EPB00 or
R0E521000CPE00 to the R0E5212DACFK00, connect
the R0E5212DACFK00 to the YQPACK080SD.
(2) For on-board evaluation
Mount an R8C/2C or 2D Group MCU and
HQPACK080SD (separately available) in that order on the
NQPACK080SD-ND on the user system. And fix them
using a screw included with the HQPACK080SD.
Before using the R0E5212DACFK00, be sure to read "7.
Precautions" on page 4 and the R0E521000EPB00 or
R0E521000CPE00 User’s Manual.
YQ-GUIDE (x4)YQPACK080SD NQPACK080SD-ND
R0E5212DACFK00
Figure 1 Package components of the R0E5212DACFK00
Figure 2 Usage of the R0E5212DACFK00
●
*:
: No. 1 pin
These products are included with the R0E5212DACFK00 package.
80-pin 0.5mm pitch
(PLQP0080KB-A) foot pattern
YQ-GUIDE (x4) *
YQPACK080SD *
NQPACK080SD-ND *
HQPACK080SD
(Not included)
MCU with on-chip
flash memory etc.
R0E5212DACFK00
(1) Debugging
(2) On-board evaluation
R0E521000EPB00
or
R0E521000CPE00
(2/4)