Renesas Starter Kit for R8C/35C Quick Start LCD module Serial port Application Board Interface Power jack Reset switch LCD module connector Boot LED User LEDs E8a emulator Analog adjust Application Board Interface E8a header Power LED LIN connector User switches
1. Installation Do not connect the E8a emulator hardware until the software support has been installed. 1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to the CD root folder and double click on “setup.exe”. Windows™ users may see “User Account Control” dialog box. If applicable enter the administrator password and click .
. High-performance Embedded Workshop Workspace High-performance Embedded Workshop integrates various tools such as compiler, assembler, debugger and editor into a common graphical user interface. To learn more on how to use High-performance Embedded Workshop, open the High-performance Embedded Workshop manual installed on your computer (Start Menu > All Programs > Renesas > High-performance Embedded Workshop > Manual Navigator). 14. Launch High-performance Embedded Workshop from the Start Menu.
29. Choose “User Flash Area” in ‘Firmware Location’ tab. 30. Choose communication baud ‘Communication Baud Rate’ tab. 31. Click . rate “500000bps” in If this isn’t the first time you have used the E8a emulator with this Renesas Starter Kit, please skip to step 36. First use of the E8a emulator 32. The ‘Please choose driver’ dialog will be shown. Click . 33. The ‘Driver Details’ dialog will be shown, please select “Renesas E-Series USB Driver” as illustrated.
36. Right click on the download module listed in the left hand pane and select “Download”. The code will be downloaded to the microcontroller. This may take several seconds. 37. Click the button. The code will run and you will see the LEDs flash on the board. 38. Click the button. The code will stop and the source code will be opened at the current program counter. 5.
