Datasheet

3. High-performance Embedded Workshop Workspace
High-performance Embedded Workshop integrates various tools such as compiler, assembler, debugger and editor
into a common graphical user interface. To learn more on how to use High-performance Embedded Workshop, open
the High-performance Embedded Workshop manual installed on your computer (Start Menu > All Programs >
Renesas > High-performance Embedded Workshop > Manual Navigator).
14. Launch High-performance Embedded Workshop from the Start Menu. (Start Menu > All Programs > Renesas >
High-performance Embedded Workshop > High-performance Embedded Workshop)
15. In the “Welcome” dialog box: Verify “Create New Workspace” is selected. Click <OK>.
16. In the “New Project Workspace” dialog box: Set the “CPU Family” to “M16C”, and verify the “Tool chain” is set to
“Renesas M16C Standard”. Select “RSKR8C35C” from the left hand pane.
17. Enter a name for the workspace. The project name will be automatically completed with the Workspace name.
You can change this name to “Tutorial” if required. Click <OK>.
18. On the “RSKR8C35C- Step 1” window: Select “Tutorial” and click <Next>.
19. On the “RSKR8C35C- Step 2” window: Click <Finish>.
20. On the Project Generator Information window: Click <OK>.
The project that is created has two configurations. The Release configuration can be used for the final release code
version. The Debug configuration allows modifications to the configuration for debugging.
21. Select the Debug build configuration in the left hand drop
down list on the toolbar.
22. Click on the “Build” icon to compile, assemble and link the project.
4. Programming and Debug
23. Ensure the “SessionR8C_E8a_SYSTEM” session in the
right hand drop down list on the toolbar is selected.
24. Click the <Connect> button on the debug toolbar.
25. Select the correct MCU group (R8C/35C Group
illustrated).
26. Select the correct device (R5F2135CC illustrated).
27. Select “Erase Flash and Connect”.
28. If the E8a is to provide power to the CPU board, select
“Power Target from Emulator” and choose the “5.0V”
option.