Datasheet

29. Choose “User Flash Area” in ‘Firmware Location’ tab.
30. Choose communication baud rate “500000bps” in
‘Communication Baud Rate’ tab.
31. Click <OK>.
If this isn’t the first time you have used the E8a emulator with this Renesas Starter Kit, please skip to step 36.
First use of the E8a emulator
32. The ‘Please choose driver’ dialog will be shown. Click <OK>.
33. The ‘Driver Details’ dialog will be shown, please select
“Renesas E-Series USB Driver” as illustrated. The ‘interface’
and ‘Channel’ items will be automatically populated. Click
<Close>.
34. The Firmware setup dialog will be shown warning you not to
disconnect the USB cable until the firmware download is
complete. Click <OK>.
35. The firmware will be downloaded to the E8a emulator; this will
take a few moments.
Please do not disconnect the E8a from the host during
download, doing so is likely to damage the E8a emulator.