User manual

Table 6-9 below describes the function of the option links associated with Analog configuration. The default configuration is indicated by
BOLD & Red text.
Option Link Settings
Reference Function Fitted Alternative (Removed) Related To
R11 Reference Voltage
Source
Reference voltage source is
taken from the external
connector CON_VREF to
ADPOT
Reference voltage source is
set to UC_VCC
R12, R13
R12 Reference Voltage
Source
Reference voltage source is
set to UC_VCC
Reference voltage source is
taken from the external
connector CON_VREF to
ADPOT
R11, R13
R13 Reference Voltage
Source
Supply to MCU
Disconnected R11, R12
R14 ADPOT
Connects on-board
potentiometer ADPOT to MCU
Port1.0 (MCU Pin#38)
Disconnected -
Table 6-9: Analog Configuration Links
12