Datasheet

Section 24 Power-Down Modes
Rev. 2.00 Sep. 28, 2009 Page 776 of 870
REJ09B0429-0200
24.1.4 Sub-Chip Module Stop Control Registers BH, BL (SUBMSTPBH, SUBMSTPBL)
SUBMSTPB specifies on-chip peripheral modules to shift to module stop mode in module units.
Each module can enter module stop mode by setting the corresponding bit to 1.
• SUBMSTPBH
Bit Bit Name
Initial
Value
R/W Corresponding Module
7 to 0 SMSTPB15
to SMSTPB8
All 1 R/W Reserved
The initial values should not be changed.
• SUBMSTPBL
Bit Bit Name
Initial
Value
R/W Corresponding Module
7 to 4 SMSTPB7
to SMSTPB4
All 1 R/W Reserved
The initial values should not be changed.
3 SMSTPB3 1 R/W Serial communication interface with FIFO (SCIF)
2 SMSTPB2 1 R/W Reserved
The initial values should not be changed.
1 SMSTPB1 1 R/W LPC interface (LPC)
0 SMSTPB0 1 R/W Reserved
The initial values should not be changed.