Datasheet

Rev. 2.00 Sep. 28, 2009 Page 859 of 870
REJ09B0429-0200
Item Page Revision (See Manual for Details)
7.2.5 DTC Transfer
Count Register A (CRA)
156 Description amended
… It is decremented by 1 every time data is transferred, and
transfer ends when the count reaches H'0000.
The number of times data is transferred is one when the setting
value of CRA is H'0001, 65,535 when the setting value is
H'FFFF, and 65,536 when the setting value is H'0000.
In repeat transfer mode CRA is divided in two, with the highest
eight bits designated as CRAH and the lowest eight bits as
CRAL. CRAH holds the value for the number of data transfers,
and CRAL functions as an 8-bit transfer counter (1 to 256).
CRAL is decremented by 1 every time data is transferred, and
the contents of CRAH are transferred when the counter value
reaches H'00. The number of times data is transferred is one
when CRAH = CRAL = H'01, 255 when CRAH = CRAL = H'FF,
and 256 when CRAH = CRAL = H'00.
In block transfer mode CRA is divided in two, with the highest
eight bits designated as CRAH and the lowest eight bits as
CRAL. CRAH holds the value for the block size, and CRAL
functions as an 8-bit block size counter (1 to 256). CRAL is
decremented by 1 every time data is transferred, and the
contents of CRAH are transferred when the counter value
reaches H'00. The block size is one byte (or one word) when
CRAH = CRAL = H'01, 255 bytes (or 255 words) when CRAH
= CRAL = H'FF, and 256 bytes (or 256 words) when CRAH =
CRAL = H'00.
7.5 Location of Register
Information and DTC
Vector Table
Figure 7.4
Correspondence
between DTC Vector
Address and Register
Information
166 Newly added
10.1 Features
• Special functions
provided by
automatic addition
function
271 Description deleted