Datasheet

Section 28 Power-Down Modes
Rev. 2.00 Aug. 20, 2008 Page 1060 of 1198
REJ09B0403-0200
28.1.3 Module Stop Control Registers H, L, and A (MSTPCRH, MSTPCRL, MSTPCRA)
MSTPCR specifies on-chip peripheral modules to shift to module stop mode in module units.
Each module can enter module stop mode by setting the corresponding bit to 1.
• MSTPCRH
Bit Bit Name Initial Value R/W Corresponding Module
7 MSTP15 0 R/W Reserved
The initial value should not be changed.
6 MSTP14 0 R/W Data transfer controller (DTC)
5 MSTP13 1 R/W 16-bit free-running timer (FRT)
4 MSTP12 1 R/W 8-bit timers (TMR_0, TMR_1)
3 MSTP11 1 R/W 14-bit PWM timer (PWMX)
2 MSTP10 1 R/W Reserved
The initial value should not be changed.
1 MSTP9 1 R/W A/D converter
0 MSTP8 1 R/W 8-bit timers (TMR_X, TMR_Y)
• MSTPCRL
Bit Bit Name Initial Value R/W Corresponding Module
7 MSTP7 1 R/W Serial communication interface 3 (SCI_3)
6 MSTP6 1 R/W Serial communication interface 1 (SCI_1)
5 MSTP5 1 R/W Reserved
The initial value should not be changed.
4 MSTP4 1 R/W I
2
C bus interface channel 0 (IIC_0)
3 MSTP3 1 R/W I
2
C bus interface channel 1 (IIC_1)
2 MSTP2 1 R/W I
2
C bus interface channel 2, 3 (IIC_2, IIC_3)
1 MSTP1 1 R/W CRC operation circuit
0 MSTP0 1 R/W I
2
C bus interface channel 4, 5 (IIC_4, IIC_5)