Datasheet

Rev. 2.00 Aug. 20, 2008 Page 1185 of 1198
REJ09B0403-0200
Item Page Revision (See Manual for Details)
Section 25 Flash
Memory
25.7 Programmer Mode
985 Description amended
… , this LSI also has a programmer mode as a further mode for
the programming and erasing of programs and data. In the
programmer mode, a general-purpose PROM programmer,
which supports microcomputers with 256
-Kbyte or 512-Kbyte
flash memory as a device type*
1
, can freely be used to write
programs to the on-chip ROM. …
In programmer mode, provide a 6-MHz input-clock signal.
25.8 Serial
Communication
Interface Specification
for Boot Mode
(4) Inquiry and Selection
States
(b) Device Selection
992 Amended
• Size (1 byte): Amount of device-code data
This is fixed at 4
(9) Programming/
Erasing State
(b) 128-byte
programming
1006 Amended
• Programming Address (4 bytes): Start address for
programming …
(i.e. H'00, H'01, H'00, H'00 : H'00010000)