Datasheet

Section 8 I/O Ports
Rev. 2.00 Aug. 20, 2008 Page 225 of 1198
REJ09B0403-0200
• P64/ExIRQ11/CTS
The pin function is switched as shown below according to the combination of the
enable/disable setting of the SCIF and the P64DDR bit.
When the ISS10 bit in ISSR16 is set to 1, this pin can be used as the ExIRQ11 input pin. To
use as the ExIRQ11 input pin, clear the P64DDR bit to 0.
SCIF Disabled Enabled
P64DDR 0 1 X
P64 input pin Pin function
IRQ11 input pin
P64 output pin CTS input pin
[Legend] X: Don't care.
• P63/PWX3
The pin function is switched as shown below according to the combination of the OEB bit in
DACR and the PWMXS bit in PTCNT0 of PWMX_1 and the P63DDR bit.
P63DDR 0 1 X
PWMXS 0 1 0 1 0
OEB 0 X 0 X 1
Pin function P63 input pin P63 output pin PWX3 output pin
[Legend] X: Don't care.
• P62/PWX2
The pin function is switched as shown below according to the combination of the OEA bit in
DACR and the PWMXS bit in PTCNT0 of PWMX_1 and the P62DDR bit.
P62DDR 0 1 X
PWMXS 0 1 0 1 0
OEA 0 X 0 X 1
Pin function P62 input pin P62 output pin PWX2 output pin
[Legend] X: Don't care.