Datasheet

Section 8 I/O Ports
Rev. 2.00 Aug. 20, 2008 Page 293 of 1198
REJ09B0403-0200
(3) Port 4 Pull-Up MOS Control Register (P4PCR)
P4PCR controls the port 4 built-in input pull-up MOSs.
Bit Bit Name Initial Value R/W Description
7 P47PCR 0 R/W
6 P46PCR 0 R/W
5 P45PCR 0 R/W
4 P44PCR 0 R/W
3 P43PCR 0 R/W
2 P42PCR 0 R/W
1 P41PCR 0 R/W
0 P40PCR 0 R/W
• Normal extended mode (ADMXE = 0)
This register has no effect on operation.
• Other modes
When the pins are in the input state, the
corresponding input pull-up MOS is turned on when
a P4PCR bit is set to 1.
(4) Noise Canceler Enable Register (P4BNCE)
The individual bits of P4BNCE enable or disable the noise canceler circuits for ports 4 and B.
Bit Bit Name Initial Value R/W Description
7 P47NCE 0 R/W
6 P46NCE 0 R/W
5 P45NCE 0 R/W
4 P44NCE 0 R/W
Enables the noise canceler circuit for the corresponding
pin and the pin state is fetched into P4DR at the
sampling cycle set by NCCS.
The operation changes according to the other control
bits. See section 8.2.4 (7), Pin Functions, for details.
3 to 0 PB3NCE to
PB0NCE
All 0 R/W Bits for port B setting