Datasheet

Section 15 Serial Communication Interface with FIFO (SCIF)
Rev. 2.00 Aug. 20, 2008 Page 528 of 1198
REJ09B0403-0200
15.4 Operation
15.4.1 Baud Rate
The SCIF includes a baud rate generator and can set the desired baud rate using registers FDLH,
FDLL, and the CKSEL bit in SCIFCR. Table 15.5 shows an example of baud rate settings.
Table 15.5 Example of Baud Rate Settings
00 01
CKSEL1,
CKSEL0
LCLK
(33 MHz) divided by 18
System Clock
(34 MHz) divided by 11
Baud rate
FDLH, FDLL
(Hex)
Error (%)
FDLH, FDLL
(Hex)
Error (%)
50 0900 -0.54% H'0F18 -0.01%
75 0600 -0.54% H'0A10 -0.01%
110 0417 -0.51% H'06DC 0.01%
300 0180 -0.54% H'0284 -0.01%
600 00C0 -0.54% H'0142 -0.01%
1200 0060 -0.54% H'00A1 -0.01%
1800 0040 -0.54% H'006B 0.30%
2400 0030 -0.54% H'0050 0.62%
4800 0018 -0.54% H'0028 0.62%
9600 000C -0.54% H'0014 0.62%
14400 0008 -0.54% H'000D 
19200 0006 -0.54% H'000A 0.62%
38400 0003 -0.54% H'0005 0.62%
57600 0002 -0.54% H'0003 
115200 0001 -0.54% H'0002 