Datasheet

Section 19 LPC Interface (LPC)
Rev. 2.00 Aug. 20, 2008 Page 732 of 1198
REJ09B0403-0200
19.3.32 BT FIFO Valid Size Register 0 (BTFVSR0)
BTFVSR0 is one of the registers used to implement BT mode. BTFVSR0 indicates a valid data
size in the FIFO for host write transfer.
R/W
Bit Bit Name Initial Value Slave Host Description
7 to 0 N7 to N0 All 0 R  These bits indicate the number of valid bytes in the
FIFO (the number of bytes which the slave can
read) for host write transfer. When data is written
from the host, the value in BTFVSR0 is incremented
by the number of bytes that have been written to.
Further, when data is read from the slave, the value
is decremented by only the number of bytes that
have been read.
19.3.33 BT FIFO Valid Size Register 1 (BTFVSR1)
BTFVSR1 is one of the registers used to implement BT mode. BTFVSR1 indicates a valid data
size in the FIFO for host read transfer.
R/W
Bit Bit Name Initial Value Slave Host Description
7 to 0 N7 to N0 All 0 R  These bits indicate the number of valid bytes in the
FIFO (the number of bytes which the host can read)
for host read transfer. When data is written from the
slave, the value in BTFVSR1 is incremented by the
number of bytes that have been written to. Further,
when data is read from the host, the value is
decremented by only the number of bytes that have
been read.