Datasheet

Section 21 Ethernet Controller Direct Memory Access Controller (E-DMAC)
Rev. 2.00 Aug. 20, 2008 Page 805 of 1198
REJ09B0403-0200
Bit Bit Name
Initial
value
R/W Description
7 RMAFIP 0 R/W Receive Multicast Address Frame Interrupt Permission
0: Receive multicast address frame interrupt is disabled
1: Receive multicast address frame interrupt is enabled
6, 5  All 0 R Reserved
This bit is always read as 0. The initial value should not
be changed.
4 RRFIP 0 R/W Receive Residual-Bit Frame Interrupt Permission
0: Receive residual-bit frame interrupt is disabled
1: Receive residual-bit frame interrupt is enabled
3 RTLFIP 0 R/W Receive Too-Long Frame Interrupt Permission
0: Receive too-long frame interrupt is disabled
1: Receive too-long frame interrupt is enabled
2 RTSFIP 0 R/W Receive Too-Short Frame Interrupt Permission
0: Receive too-short frame interrupt is disabled
1: Receive too-short frame interrupt is enabled
1 PREIP 0 R/W PHY-LSI Receive Error Interrupt Permission
0: PHY-LSI receive error interrupt is disabled
1: PHY-LSI receive error interrupt is enabled
0 CERFIP 0 R/W CRC Error on Received Frame
0: CRC error on received frame interrupt is disabled
1: CRC error on received frame interrupt is enabled