Datasheet

REVISION HISTORY R8C/10 Group Datasheet
Rev. Date Description
Page Summary
A-1
1.00 Jun. 19, 2003 First edition issued
1.10 Sep. 08, 2003 Table 1.1: Shortest instruction execution time and f(XIN) changed
____________
Figure 1.3: Pin name changed from TXOUT to CNTR0
____________
Table 1.3: Pin name changed from TXOUT to CNTR0
The value of Time C register after reset changed
Chapter “5. Electrical Characteristics” added
2
5
6
12
14
1.20 Oct. 31, 2003
Table 1.1: Power consumption values added
Table 1.3: Resistor value for CNVss and MODE deleted
Table 5.2: Note 3 and Note 4 deleted
tsamp in Table 5.3 deleted
Figure 5.1 added
Table 5.7: Vcc changed from “4.2 to 5.5V” to “3.3V to 5.5V”, on-chip oscillator
changed from “on 100kHz” to “125kHz”, XIN=5MHz deleted and XIN=10MHz added
in high-speed mode and medium-speed mode, data added and modified
Table 5.8 to Table 5.12 added
Figure 5.2 added
Table 5.13: Note 1, f(BCLK)=5 MHz changed to 10 MHz
Table 5.14: on-chip oscillator changed from “on 100kHz” to “125kHz”, XIN=5MHz
deleted and XIN=10MHz added in high-speed mode and medium-speed mode, data
added and modified
Table 5.15 to Table 5.19 added
Figure 5.3 added
2
6
14
15
16
18
19
20
21
22
23
24
1.30 Dec 05, 2003 4 Table 1.2 : ** deleted
15 Table 5.4 revised
1.40 Sep 30, 2004 All pages Words standardized (on-chip oscillator, serial interface, A/D)
2 Table 1.1 revised
5 Figure 1.3, NOTES 3 added
6 Table 1.3 revised
10-13 One body sentence in chapter 4 added ; Titles 4.1 to 4.4 added
12 Table 4.3 revised ; Table 4.4 revised
14 Table 5.2 revised
15 Table 5.3 revised ; Table 5.4 revised
17 Table 5.6 revised
18 Table 5.7 revised
19 Table 5.8 revised ; Table 5.12 revised
21 Table 5.13 revised
22 Table 5.14 revised
23 Table 5.15 revised ; Table 5.17 revised ; Table 5.19 revised
1.50 Apr.27.2005 4 Table 1.2, Figure 1.2 package name revised
5 Figure 1.3 package name revised
10 Table 4.1 revised