Datasheet

R8C/26 Group, R8C/27 Group 5. Electrical Characteristics
Rev.2.10 Sep 26, 2008 Page 24 of 69
REJ03B0168-0210
5. Electrical Characteristics
5.1 N, D Version
NOTES:
1. V
CC = 2.2 to 5.5 V at Topr = -20 to 85°C (N version) / -40 to 85°C (D version), unless otherwise specified.
2. The average output current indicates the average value of current measured during 100 ms.
Table 5.1 Absolute Maximum Ratings
Symbol Parameter Condition Rated Value Unit
V
CC/AVCC Supply voltage -0.3 to 6.5 V
V
I Input voltage -0.3 to VCC + 0.3 V
V
O Output voltage -0.3 to VCC + 0.3 V
P
d Power dissipation Topr = 25°C500mW
T
opr Operating ambient temperature -20 to 85 (N version) /
-40 to 85 (D version)
°C
T
stg Storage temperature -65 to 150 °C
Table 5.2 Recommended Operating Conditions
Symbol Parameter Conditions
Standard
Unit
Min. Typ. Max.
V
CC/AVCC Supply voltage 2.2 − 5.5 V
V
SS/AVSS Supply voltage − 0 − V
V
IH Input “H” voltage 0.8 VCC − VCC V
V
IL Input “L” voltage 0 − 0.2 VCC V
I
OH(sum) Peak sum output
“H” current
Sum of all pins IOH(peak) −−-160 mA
I
OH(sum) Average sum
output “H” current
Sum of all pins IOH(avg) −−-80 mA
I
OH(peak) Peak output “H”
current
Except P1_0 to P1_7 −−-10 mA
P1_0 to P1_7 −−-40 mA
I
OH(avg) Average output
“H” current
Except P1_0 to P1_7 −−-5 mA
P1_0 to P1_7 −−-20 mA
I
OL(sum) Peak sum output
“L” currents
Sum of all pins IOL(peak) −−160 mA
I
OL(sum) Average sum
output “L” currents
Sum of all pins IOL(avg) −−80 mA
I
OL(peak) Peak output “L”
currents
Except P1_0 to P1_7 −−10 mA
P1_0 to P1_7 −−40 mA
I
OL(avg) Average output
“L” current
Except P1_0 to P1_7 −−5mA
P1_0 to P1_7 −−20 mA
f
(XIN) XIN clock input oscillation frequency 3.0 V ≤ VCC ≤ 5.5 V 0 − 20 MHz
2.7 V ≤ V
CC < 3.0 V 0 − 10 MHz
2.2 V ≤ V
CC < 2.7 V 0 − 5MHz
f
(XCIN) XCIN clock input oscillation frequency 2.2 V ≤ VCC ≤ 5.5 V 0 − 70 kHz
− System clock OCD2 = 0
XlN clock selected
3.0 V ≤ V
CC ≤ 5.5 V 0 − 20 MHz
2.7 V ≤ V
CC < 3.0 V 0 − 10 MHz
2.2 V ≤ V
CC < 2.7 V 0 − 5MHz
OCD2 = 1
On-chip oscillator clock
selected
FRA01 = 0
Low-speed on-chip
oscillator clock selected
− 125 − kHz
FRA01 = 1
High-speed on-chip
oscillator clock selected
3.0 V ≤ V
CC ≤ 5.5 V
−−20 MHz
FRA01 = 1
High-speed on-chip
oscillator clock selected
2.7 V ≤ V
CC ≤ 5.5 V
−−10 MHz
FRA01 = 1
High-speed on-chip
oscillator clock selected
2.2 V ≤ V
CC ≤ 5.5 V
−−5MHz