Datasheet

R8C/26 Group, R8C/27 Group 5. Electrical Characteristics
Rev.2.10 Sep 26, 2008 Page 61 of 69
REJ03B0168-0210
NOTE:
1. V
CC = 4.2 to 5.5 V at Topr = -40 to 85°C (J version) / -40 to 125°C (K version), f(XIN) = 20 MHz, unless otherwise specified.
Table 5.47 Electrical Characteristics (1) [VCC = 5 V]
Symbol Parameter Condition
Standard
Unit
Min. Typ. Max.
V
OH Output “H” voltage Except XOUT IOH = -5 mA VCC - 2.0 − VCC V
I
OH = -200 µAVCC - 0.3 − VCC V
XOUT Drive capacity HIGH I
OH = -1 mA VCC - 2.0 − VCC V
Drive capacity LOW I
OH = -500 µAVCC - 2.0 − VCC V
V
OL Output “L” voltage Except XOUT IOL = 5 mA −−2.0 V
I
OL = 200 µA −−0.45 V
XOUT Drive capacity HIGH I
OL = 1 mA −−2.0 V
Drive capacity LOW I
OL = 500 µA −−2.0 V
V
T+-VT- Hysteresis
INT0
, INT1, INT3,
KI0
, KI1, KI2, KI3,
TRAIO, RXD0, RXD1,
CLK0, CLK1,
SSI, SCL, SDA, SSO
0.1 0.5
− V
RESET
0.1 1.0 − V
I
IH Input “H” current VI = 5 V, VCC = 5V −−5.0 µA
I
IL Input “L” current VI = 0 V, VCC = 5V −−-5.0 µA
R
PULLUP Pull-up resistance VI = 0 V, VCC = 5V 30 50 167 kΩ
RfXIN Feedback
resistance
XIN − 1.0 − MΩ
VRAM RAM hold voltage During stop mode 2.0 −−V