Datasheet

R8C/28 Group, R8C/29 Group 5. Electrical Characteristics
Rev.2.10 Sep 26, 2008 Page 46 of 67
REJ03B0169-0210
i = 0 or 1
Figure 5.18 Serial Interface Timing Diagram when VCC = 2.2 V
NOTES:
1. When selecting the digital filter by the INTi
input filter select bit, use an INTi input HIGH width of either (1/digital filter clock
frequency × 3) or the minimum value of standard, whichever is greater.
2. When selecting the digital filter by the INTi
input filter select bit, use an INTi input LOW width of either (1/digital filter clock
frequency × 3) or the minimum value of standard, whichever is greater.
Figure 5.19 External Interrupt INTi Input Timing Diagram when VCC = 2.2 V
Table 5.32 Serial Interface
Symbol Parameter
Standard
Unit
Min. Max.
t
c(CK) CLK0 input cycle time 800 − ns
t
W(CKH) CLK0 input “H” width 400 − ns
t
W(CKL) CLK0 input “L” width 400 − ns
t
d(C-Q) TXDi output delay time − 200 ns
t
h(C-Q) TXDi hold time 0 − ns
t
su(D-C) RXDi input setup time 150 − ns
t
h(C-D) RXDi input hold time 90 − ns
Table 5.33 External Interrupt INTi (i = 0, 1, 3) Input
Symbol Parameter
Standard
Unit
Min. Max.
t
W(INH)
INTi input “H” width
1000
(1)
− ns
t
W(INL)
INTi input “L” width
1000
(2)
− ns
tW(CKH)
tC(CK)
tW(CKL)
th(C-Q)
th(C-D)
tsu(D-C)td(C-Q)
CLK0
TXDi
RXDi
VCC = 2.2 V
i = 0 or 1
INTi input
tW(INL)
tW(INH)
VCC = 2.2 V
i = 0, 1, 3