Datasheet

R8C/2E Group, R8C/2F Group 5. Electrical Characteristics
Rev.1.00 Dec 14, 2007 Page 24 of 39
REJ03B0222-0100
5. Electrical Characteristics
NOTES:
1. V
CC = 2.7 to 5.5 V at Topr = −20 to 85°C (N version) / −40 to 85°C (D version), unless otherwise specified.
2. The average output current indicates the average value of current measured during 100 ms.
Table 5.1 Absolute Maximum Ratings
Symbol Parameter Condition Rated Value Unit
V
CC/AVCC Supply voltage −0.3 to 6.5 V
V
I Input voltage −0.3 to VCC + 0.3 V
V
O Output voltage −0.3 to VCC + 0.3 V
P
d Power dissipation Topr = 25°C500mW
T
opr Operating ambient temperature −20 to 85 (N version) /
−40 to 85 (D version)
°C
T
stg Storage temperature −65 to 150 °C
Table 5.2 Recommended Operating Conditions
Symbol Parameter Conditions
Standard
Unit
Min. Typ. Max.
V
CC/AVCC Supply voltage 2.7 − 5.5 V
V
SS/AVSS Supply voltage − 0 − V
V
IH Input “H” voltage 0.8 VCC − VCC V
V
IL Input “L” voltage 0 − 0.2 VCC V
I
OH(sum) Peak sum output
“H” current
Sum of all pins IOH(peak) −−−160 mA
I
OH(sum) Average sum
output “H” current
Sum of all pins IOH(avg) −−−80 mA
I
OH(peak) Peak output “H”
current
Except P1_0 to P1_7 −−−10 mA
P1_0 to P1_7 −−−20 mA
I
OH(avg) Average output
“H” current
Except P1_0 to P1_7 −−−5mA
P1_0 to P1_7 −−−10 mA
I
OL(sum) Peak sum output
“L” currents
Sum of all pins IOL(peak) −−160 mA
I
OL(sum) Average sum
output “L” currents
Sum of all pins IOL(avg) −−80 mA
I
OL(peak) Peak output “L”
currents
Except P1_0 to P1_7 −−10 mA
P1_0 to P1_7 −−20 mA
I
OL(avg) Average output
“L” current
Except P1_0 to P1_7 −−5mA
P1_0 to P1_7 −−10 mA
f
(XIN) XIN clock input oscillation frequency 3.0 V ≤ VCC ≤ 5.5 V 0 − 20 MHz
2.7 V ≤ V
CC < 3.0 V 0 − 10 MHz
− System clock OCD2 = 0
XlN clock selected
3.0 V ≤ V
CC ≤ 5.5 V 0 − 20 MHz
2.7 V ≤ V
CC < 3.0 V 0 − 10 MHz
OCD2 = 1
On-chip oscillator clock
selected
FRA01 = 0
Low-speed on-chip
oscillator clock selected
− 125 − kHz
FRA01 = 1
High-speed on-chip
oscillator clock selected
3.0 V ≤ V
CC ≤ 5.5 V
−−20 MHz
FRA01 = 1
High-speed on-chip
oscillator clock selected
2.7 V ≤ V
CC ≤ 5.5 V
−−10 MHz