Hardware manual

e
2
studio 3.1 Release Note
Rev 1.0, Jan 21st, 2015 Page 23
5963
Real-time Watch
When debugging with ARM devices, the Expressions view is not properly showing values for
structure records.
5980
Application
Missing Listing files when using KPIT tool chains.
The work-a-round to this is to turn off the listing option in the main level project and then walk
through each and every source file and change / enable the listing option on the individual source
modules manually.
6026
RTOS Project
Problem: RTOS project for RX71M cannot be created in this version of e
2
studio.
Workaround: Please create the project for RX64M and customize this project.
6242
CCRX Build
Problem: When the library project for RX71M is created, the following Build error occurs.
E0511175: Neither isa nor cpu is specified.
Workaround: Please specify the -isa=rxv2.
6256
Debug Configuration
When visiting the debug configuration on German Windows the Operating Frequency is modified
from a 24,000 to 24.000 when using RX71M. On German Windows the decimal separator should
be shown as a ‘,’. Once changed back debug connection is possible however visiting the debug
configuration again will again change the ‘,’ to a ‘.’.