Technical information

Section 2 Connecting the Emulator to the User System
Rev. 2.00 Feb. 18, 2009 Page 12 of 94
REJ10J1938-0200
2.2.2 Connecting the E200F Expansion AUD Trace Unit to the EV-chip Unit
• When the expansion AUD trace unit is used with the EV-chip unit, connect the expansion
AUD trace unit to the EV-chip unit as shown in figure 2.3.
Figure 2.3 Connecting the Expansion AUD Trace Unit to the EV-chip Unit
• After checking the location of pin 1, connect the EV-chip unit, expansion AUD trace unit, and
trace cable.