Technical information

Section 2 Connecting the Emulator to the User System
Rev. 2.00 Feb. 18, 2009 Page 16 of 94
REJ10J1938-0200
2.2.5 Connecting the EV-chip Unit to the User System Interface Cable
• After checking the location of pin 1, connect the EV-chip unit to the user system interface
cable.
(1) Connecting the SH72546RFCC, SH72544R, or SH72543R EV-chip Unit to the User
System Interface Cable.
Expansion AUD trace unit
EV-chip unit
Common user-system interface
adaptor cable (cable unit)
User-system interface converter board
IC socket plug
Common user-system interface
adaptor cable (board unit)
IC socket
User system
x 3
Figure 2.7 Connecting User System Interface Cable and EV-Chip Unit
CAUTION
Check the location of pin 1 before connecting.
Note: For the method of connecting the user system interface cable and user system, refer to the
user’s manual for the user system interface cable for the individual supported MCU.