Technical information

Section 2 Connecting the Emulator to the User System
Rev. 2.00 Feb. 18, 2009 Page 20 of 94
REJ10J1938-0200
2.4 Installing the H-UDI Port Connector on the User System
Table 2.2 shows the recommended H-UDI port connectors for the emulator.
Table 2.2 Recommended H-UDI Port Connectors
Connector Type Number Manufacturer Specifications
36-pin connector DX10M-36S Hirose Electric Co., Ltd. Screw type
DX10M-36SE,
DX10G1M-36SE
Lock-pin type
Note: When designing the 36-pin connector layout on the user board, do not connect any
components under the H-UDI connector.