Technical information

Section 3 Software Specifications when Using the SH72546RFCC, SH72544R, SH72543R, SH72531, and SH72531FCC
Rev. 2.00 Feb. 18, 2009 Page 38 of 94
REJ10J1938-0200
13. Reset Input
During execution of the user program, the emulator may not operate correctly if a contention
occurs between the following operations for the emulator and the reset input to the target
device:
⎯ Setting an Event Condition
⎯ Setting an internal trace
⎯ Displaying the content acquired by an internal trace
⎯ Reading or writing of a memory
Note that those operations should not contend with the reset input to the target device.
14. MCU Operating Mode
Boot mode is not supported in the SH72546RFCC, SH72544R, SH72543R, SH72531, or
SH72531FCC.