Technical information

Section 3 Software Specifications when Using the SH72546RFCC, SH72544R, SH72543R, SH72531, and SH72531FCC
Rev. 2.00 Feb. 18, 2009 Page 56 of 94
REJ10J1938-0200
(b) Window Trace Function
Memory access in the specified range can be acquired by trace.
Two memory ranges can be specified for channels A and B. The read, write, or read/write cycle
can be selected as the bus cycle for trace acquisition.
[Setting Method]
(i) Select the [Channel A] and [Channel B] check boxes in the [AUD mode] group box of the
[Trace mode] page. Each channel will become valid.
(ii) Open the [Window trace] page and specify the bus cycle and memory range that are to be set
for each channel.