Technical information

Section 3 Software Specifications when Using the SH72546RFCC, SH72544R, SH72543R, SH72531, and SH72531FCC
Rev. 2.00 Feb. 18, 2009 Page 84 of 94
REJ10J1938-0200
Notes: 1. With the above settings, if a value is changed other than through access by the CPU,
the changed value will not be shown.
2. If a “LOST” condition is generated in the EVA AUD trace function, the correct values
will not be shown.
3. An address range of 1024 bytes or more can be set for [Window trace] of the EVA
AUD trace function; however, four address areas of 256 bytes are actually available for
the EVA AUD monitoring function.
4. In the range of four address areas of 256 bytes that have been set with the EVA AUD
monitoring function, four or more address areas will be displayed in the monitoring
window shown by the monitoring function.