Datasheet

TK-850/JG3H User’s Manual
- 18 -
1.4 Installation of USB Driver
"NEC Electronics Starter Kit Virtual UART" USB driver must be installed on PC before you start using
the TK-850/JG3H.
Please, follow the instruction below to install the driver.
"Starter Kit USB Driver" must be installed on the PC. If not, please refer to "1.2 Installation of
Development Tools" to install the driver first.
CAUTION:
Do not use a USB hub for connecting TK-850
First, connect the TK-850 to PC with USB.
Depending on the version of Windows OS, the installation will be differed. Please check your
Windows version, and follow the instructions
- Windows XP -> "1.4.1 Installation on Windows XP"
- Windows 2000 -> "1.4.2 Installation on Windows 2000"
After the installation, go to "1.4.3 Completion of USB Driver Installation"