Datasheet

TK-850/JG3H User’s Manual
- 50 -
3.3 Hardware Functions
3.3.1 SW1
The bit 1-4 on SW1 are for mode settings, Bit5-8 of SW1 are connected to ”P78/ANI8”～”
P711/ANI11” for general-purpose input port.
● For the use of ID850QB, use following settings.
SW1
* When ID850QB is used, these terminals cannot be used because it communicates with the host
machine by using and the terminal P30 and P31.
● Please change to the following settings when writing it in the flash memory with built-in CPU by using
WriteEZ1. (The hardware of WriteEZ1 is built into TK-850/JG3H.)
SW1
● To run the programs stored in built-in flash memory by WriteEZ1, use following settings and re-supply
power.
SW1
● Please change to the following settings when you connect N-Wire emulator.
SW1
Bit1 OFF
Bit2 ON
Bit3 ON
Bit4 ON
Bit1 OFF
Bit2 ON
Bit3 ON
Bit4 ON
Bit1 OFF
Bit2 OFF
Bit3 OFF
Bit4 OFF
Bit1 OFF
Bit2 OFF
Bit3 OFF
Bit4 OFF