Datasheet

6.2. Start Up current
The start-up current parameter is responsible for the proper motor start-up. Please enter an average value that will
not damage the motor. This value can be increased slowly if the motor fails to start at the end of the procedure.
Click the button “Write” to save the new parameter value.
Note: The value 3 in the picture below means 0.3 Amperes.
Setting the start-up current during motor tuning
6.3. Maximum Current
Maximum current specifies the maximum current to be imposed.
It should be set accordingly the inverter and the motor specifications, and as required by the application.
Click the button “Write” to save the new parameter value.
The value 3 in the picture below means 0.3 Amperes.
Setting the maximum current for motor tuning