Installation guide

12 Front panel description

2.0 Front panel description

Figure 2 - Front panel of the SPA1.

Key

1 – X axis overload indicator (refer to section 2.1)

2 – Y axis overload indicator (refer to section 2.1)

3 – Z axis overload indicator (refer to section 2.1)

4 – Emergency stop indicator (refer to section 2.2)

5 – Motor enabled indicator (refer to section 2.3)

6 – Power indicator (refer to section 2.4)

7 – Emergency Stop button (refer to section 2.5)

2.1 Axis overload

There are a number of possible causes for this LED to become lit, please refer to the Control

Techniques™, “Mini Maestro™” User guide supplied with the product.

2.2 Emergency stop LED

This LED is lit when the SPA1 is aware of an Emergency Stop being applied to the system. During normal

operation this LED is extinguished.

2.3 Motor enabled

This LED is lit when the SPA1 servo amps are engaged.

2.4 Power

This LED is lit when there is a mains supply attached to the SPA1 unit.

2.5 Emergency stop button

A normal category ‘0’ emergency stop function is provided within this unit. It is the machine installers

responsibility to add any additional emergency stop switches that the system requires.

765

1 2 3