Installation guide

Rear panel description 13
3.0 Rear panel description
Figure 3 - Rear panel of the SPA1.
Key
1. Emergency stop connector (refer to section 3.1)
2. Machine I/O connector (refer to section 3.2)
3. SPA connector (refer to section 3.3)
4. Z motor connector (refer to section 3.4)
5. Y motor connector (refer to section 3.4)
6. X motor connector (refer to section 3.4)
7. Mains power ON/OFF switch
8. Main power input via an IEC320 connector
9. Earth stud
10. Version number label
11. Serial number label
11 10 9
7
12 3 4 5 6
8