Installation guide

© 2002 Renishaw. All rights reserved.
Renishaw® is a registered trademark of Renishaw plc.
This document may not be copied or reproduced in
whole or in part, or transferred to any other media or
language, by any means, without the prior written
permission of Renishaw.
The publication of material within this document does
not imply freedom from the patent rights of Renishaw
plc.
Disclaimer
Considerable effort has been made to ensure that the
contents of this document are free from inaccuracies
and omissions. However, Renishaw makes no
warranties with respect to the contents of this
document and specifically disclaims any implied
warranties. Renishaw reserves the right to make
changes to this document and to the product
described herein without obligation to notify any
person of such changes.
Trademarks
All brand names and product names used in this
document are trade names, service marks,
trademarks, or registered trademarks of their
respective owners.
Care of equipment
Renishaw probes and associated systems are
precision tools used for obtaining precise
measurements and must therefore be treated with
care.
Changes to Renishaw products
Renishaw reserves the right to improve, change or
modify its hardware or software without incurring any
obligations to make changes to Renishaw equipment
previously sold.
Renishaw part no: H-1000-5068-02-A
Issued: September 2002
Warranty
Renishaw plc warrants its equipment for a limited
period (as set out in our Standard Terms and
Conditions of Sale) provided that it is installed exactly
as defined in associated Renishaw documentation.
Prior consent must be obtained from Renishaw if non-
Renishaw equipment (e.g. interfaces and/or cabling) is
to be used or substituted. Failure to comply with this
will invalidate the Renishaw warranty.
Claims under warranty must be made from authorised
Service Centres only, which may be advised by the
supplier or distributor.
References and associated documents
It is recommended that the following documentation is
referenced to when installing the SPA1.
Renishaw documents
Documentation supplied on Renishaw UCC1 software
CD.
Document No. Title
H-1000-5056 UCC-1 controller, installation
manual
H-1000-5057 UCC-1 controller, programmer’s
guide
H-1000-5058 RENICIS user’s guide
H-1000-5227 Servo tuning guide
H-1000-5067 MCU installation and user’s guide
External documents
National and international standards including the
following may be applicable to the finished machine or
installation:
EN 292-2:1991 (Safety of machinery - Basic concepts,
general principles for design - Part 2: Technical
principles and specifications.
EN (IEC) 60204-1:1997 (Safety of machinery -
Electrical equipment of machines - Part 1: General
requirements).”
Document No. Title
0470-0005 User guide, Mini Maestro drive