User's Manual

Does this diagram need updating?
Operating envelope
Radio transmission does not require line-of-sight
and will pass through small gaps and machine tool
windows, providing a reflected path (of less than
10 m (49.2 ft)) is available.
To ensure unrestricted transmission performance:
Keep all Primo System components within the
performance envelope (section 5.2).
Ensure the Interface signal LED stays close to green.
Green represents excellent signal, yellow represents
reduced signal (section 5.28).
Do not allow coolant and swarf residue to
accumulate on the equipment.
Regularly wipe clean the Part Setter Body and the
3D Tool Setter window.
Reduction in transmission range may result when
operating in temperatures 0 ˚C to +5 ˚C (+32 ˚F to
+41 ˚F) and +55 ˚C to +60 ˚C (+122 ˚F to +140 ˚F).
Avoid these temperature ranges if possible.
Signal strength LED
The signal LED on the Primo Interface indicates the number of
missed communications with the equipment. The LED shows
with Green to Amber the number of missed communications.
When communication fails the LED goes out.
The system will continue to perform 100% effectively as long
as there is signal.
System installation
5.1
PRIMO
Primo Radio
Part Setter
Primo Radio
3D Tool Setter
0% missed 100% 50%