User's Manual

Interface cable
A ferrule should be crimped onto each cable wire
for a more positive connection at the terminal box.
A cable sealing gland prevents coolant and dirt
from entering the Interface.
The Interface cable can be further protected by a
flexible conduit.
Fitting flexible conduit
The recommended flexible conduit is Anamet
TM
Sealtite HFX (5/16 in) Polyurethane.
1. Slide nut B and plastic olive onto the
Conduit.
2. Screw conduit termination piece into end of
the conduit.
3. Fit conduit to adaptor A and tighten nut B.
Cable specification
Length
Diameter
Number of cores
Dimensions of each core
8 m (26.25 ft)* 7.5 mm (0.29 in) 13 cores 18 x 0.1 mm
CAUTIONS:
Failure to protect the cable can result in system
failure due to either cable damage or coolant
ingress through cores into the Interface.
Failure due to inadequate cable protection will
invalidate the warranty.
System
installation
5.13