User Manual

Introduction
The Primo Interface enables communication
between the Machine Tool, Radio Part Setter and
the Radio 3D Tool Setter using radio frequencies.
Power supply
The Interface requires a 12 Vdc to 30 Vdc supply
capable of supplying 150 mA minimum (TBC).
Input voltage ripple
The input voltage ripple must not cause the
voltage to fall below 12 V or go above 30 V.
ReniKey
Renikey is a Renishaw machine programme which
is used while partnering the equipment with the
Interface. Refer to the ReniKey programming
manual for instructions on how to use ReniKey or
refer to www.renishaw.com.
Interface visual diagnostics
Primo Interface basics
3.1
Digital ‘remaining credit’
display and Error code
display
Note:
If the Primo System is using a Primo Upgrade
Credit Token and the Primo Interface is returned
to Renishaw then the Primo Upgrade Credit
Token must be returned with the interface for
identification purposes.