Quick Start Guide

22
Deflect the stylus to select
“Partnering mode on”. Ensure
this is done within 60 seconds of
the RMI-QE status LED flashing
green.

RMP400 – RMI-QE partnership
System set-up can be achieved by using Trigger Logic™.


SYSTEM STATUS LED
RMI-QE in “Partnering
mode” with empty probe
location
or
SYSTEM STATUS LED
RMI-QE in “Partnering
mode”with full probe
location
Switch on the RMI-QE
Partnering mode
Partnering mode off
Partnering mode
Partnering mode off (RMI-QE found)
RMI-QE