Quick Start Guide

28
Changing the probe settings when partnered to a RMI-QE
Probe settings can be changed using Trigger Logic™.

To partner the probe and/or change the probe settings, go to the next page.
Battery status
Battery good
or
Battery low
Key to the symbols
LED short ash
LED long ash
To exit, leave the stylus untouched for more
than 120 seconds.
Deect the stylus for less than 4 seconds to move to the next
menu option.
To exit, leave the stylus untouched for more
than 20 seconds.
Deect the stylus for more than 4 seconds to move to the
next menu.
Deect the stylus and hold it deected until after the battery
status has been displayed at the end of the review sequence.
LED Check
3
> 5 s
2
1
×