User's Manual

38
Fault-finding
Probe crash.
RMP60 status LEDs do
not correspond to RMI
status LEDs.
RMP60 probe status
LED continually lit red.
Review program.
Review installation.
Review probe software.
Review program.
Check position of RMI,
see Operating envelope.
Review installation.
Partner RMP60 and RMI.
Change batteries.
Inspection probe using
tool setting probe signals.
Probe length offset
missing/incorrect.
Workpiece obstructing probe
path.
Radio link failure – RMP60
out of RMI range.
RMP60 has been
enclosed/shielded by metal.
RMP60 and RMI are not
partnered.
Dead batteries.
Symptom Cause Action