User manual

ManualsBrandsRENKFORCE ManualsSocket StripsSurge protection socket strip 6x Black PG connector

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent

the technical status at the time of printing.

Operation

It is to be ensured that all connecting cables are not to be bent or squashed.

The consequence of this could be malfunctions, short circuiting or a device

defect.

Make sure that the power strip is de-energised before you connect any

devices.

The power strip is not designed to be mounted or hung for example using

screw connections. It can only be placed on an even and horizontal surface.

• Make sure that the ON/OFF main switch and the separate ON/OFF switches are

turned off (set to the 0 position (off)).

• Connect the plug of the power strip to your mains outlet.

• Connect up to six devices to the safety sockets of the power strip.

• Now switch on the power strip by pressing the ON/OFF main switch. The ON/OFF

main switch turns red.

• The surge protection indicator lamp turns blue and indicates that the surge protec-

tion is active. If the surge protection indicator lamp no longer comes on, the surge

protection is no longer available.

• Switch on the power points individually using the separate ON/OFF switches. The

ON/OFF switches turn red.

Maintenance and cleaning

• The product is maintenance-free for you. There are no components which have to

be maintained by you inside the product. As a result you should never open/disman-

tle it. Maintenance and repairs can only be carried out by a specialist or a specialist

workshop.

• Before cleaning always remove the plug of the power strip from the mains socket.

Then disconnect all connected devices from the power strip.

• For cleaning all you require is a dry, soft and clean cloth. Dust can be easily remove

with the aid of a longhaired, soft and clean brush and a vacuum cleaner.

• Never use aggressive cleansers or chemical solvents. They might damage the

housing and impair the functioning of the unit.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the

household waste.

At the end of its service life, dispose of the product according to the relevant

statutory regulations.

You thus fulﬁl the legal requirements and make your contribution to protect-

ing the environment.

Technical data

Connection data ................................. 230 V/AC (max. 250 V/AC), 50 Hz, 16 A, max. 3680 W

Grounded mains sockets .................. 6, with integrated child protection

Leakage current ................................. max. 9000 A (2 x 4500 A)

Cable length ........................................ 1.5 m

Measurements (L x H x W) ............... 324 x 39 x 70 mm

Weight .................................................. approx. 490 g