User manual

ManualsBrandsRENKFORCE ManualsInterface CablesN/A Repeater Cable

Connection

To connect the USB repeater cable with your device, simply connect the female end

(USB socket) of the cable to your device and the male end (USB plug) to your desktop

or notebook.

Use only a USB port that can supply a current of at least 500mA (e.g. the USB port of a

computer or a USB hub with its own power supply) for connecting the repeater cable.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the

household waste.

At the end of its service life, dispose of the product according to the relevant

statutory regulations.

Technical data

Supply voltage .................................... 5 V/DC, 115 mA

Operating temperature...................... 0 to +70 °C

Data transfer rate............................... max. 480 MBit/s

Color ..................................................... black

Cable length ........................................ 15 m (Item no. 1360256)

............................................................... 20 m (Item no. 1359546)

Weight .................................................. 586 g (Item no. 1360256)

............................................................... 780 g (Item no. 1359546)

Operating instructions

USB 2.0 Extension Cable

Item no. 1360256 (15 m)

Item no. 1359546 (20 m)

Intended use

The USB 2.0 repeater cable is an active extension cable that facilitates extending the

distance between USB device and computer. Power is supplied directly via the USB

interface.

For safety and approval purposes (CE), you must not rebuild and/or modify this pro-

duct. If you use the product for purposes other than those described above, the pro-

duct may be damaged. In addition, improper use can cause hazards such as short cir-

cuiting, ﬁre, electric shock etc. Read the instructions carefully and keep them. Make

this product available to third parties only together with its operating instructions.

Delivery content

• USB extension cable

• Operating instructions

Safety instructions

Read the operating instructions carefully and especially observe the safety

information. If you do not follow the safety instructions and information on

proper handling in this manual, we assume no liability for any resulting

personal injury or damage to property. Such cases will invalidate the war-

ranty/guarantee.

• Always lay the cables so that nobody can trip over or become entangled

in them.

• Make sure that the cable is not pinched, kinked or damaged by sharp

edges.

• The product is not a toy. Keep it out of the reach of children and pets.

• Protect the product from extreme temperatures, direct sunlight, strong

jolts, high humidity, moisture, ﬂammable gases, vapours and solvents.

• Handle the product carefully. Jolts, impacts or a fall even from a low

height can damage the product.

• Also observe the safety and operating instructions of any other devices

which are connected to the product.

• Consult an expert when in doubt about operation, safety or connection of

the device.

• Maintenance, modiﬁcations and repairs are to be performed exclusively

by an expert or at a qualiﬁed shop.

•

If you have questions which remain unanswered by these operating instruc-

tions, contact our technical support service or other technical personnel.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent

the technical status at the time of printing.